Monitoring LED Spectrum and Degradation: On-Site Rapid Analysis in Greenhouses

19 September 2026
In greenhouse operations, monitoring the spectral distribution of horticultural luminaires has traditionally required laboratory measurements in an integrating sphere or contracting external audit services. The release of the LX1400 PAR portable spectrometer from Dutch supplier Nieuwkoop simplifies on-site diagnostics of lighting installations. We examine the practical tasks addressed by the mobile device during incoming inspection and dynamic lighting monitoring, compare rapid field measurements with laboratory testing, and outline a protocol for chief engineers to audit LED equipment.

The transition of protected cultivation to LED supplemental lighting has presented agronomic and engineering teams with the task of regular optical parameter monitoring. While the radiation spectrum of high-pressure sodium lamps was strictly fixed by the physics of the gas discharge, in LED luminaires the spectral distribution is formed by a combination of different diode types. Over time, semiconductor chips and secondary optics undergo thermal and radiation degradation at varying rates, leading to a shift in wavelength ratios. Until recently, comprehensive spectral analysis required either dismantling luminaires for shipment to a specialized laboratory or bringing in costly specialized equipment.

Portable Spectrometer for Operational Audits

Netherlands-based horticultural supplier Nieuwkoop has introduced the LX1400 PAR spectrometer for measuring the full light spectrum of LED fixtures, designed for growers and consultants. The device is focused on rapid diagnostics directly within commercial greenhouse environments, enabling operators to obtain an optical emission profile without decommissioning equipment.

As reported by Jaap van Staaveren from UFO Supplies, the device delivers a full spectrum picture at the push of a button in seconds and visually backs up data for clients. In his view, the ability to quickly visualize spectral components, including red, blue, and far-red ranges, simplifies monitoring actual luminaire performance and accelerates operational decision-making.

For advanced engineering workflows, the instrument features a data export function for further computer analysis using the free software included with the device. This allows operators to build an archive of measurement data, compare spectral energy distribution curves, and generate reference profiles for lighting installation test points.

Monitoring Tasks in Commercial Greenhouses

According to the developers and industry experts, the device enables verification of lighting installations both at the point of purchase and during operation, as well as while optimizing cultivation with dynamic lighting. In practice, this covers three key stages of the supplemental lighting lifecycle:

  • Incoming batch inspection. During equipment acceptance, selective spot checks verify that the manufacturer's declared spectral distribution matches actual output and that variance among luminaires within a batch remains within permissible technological tolerances. Understanding the difference between a grow light and a standard lamp in terms of PAR flux density is critical to preventing the delivery of non-compliant fixtures.
  • Monitoring degradation and spectral drift. Different types of semiconductor emitters (such as monochromatic red and phosphor-converted white LEDs) degrade at different rates. Over time, the cumulative spectrum of an installation can shift, affecting plant photomorphogenesis. Rapid spectrometry enables early detection of this process long before visible agronomic abnormalities emerge.
  • Tuning multi-channel systems. When using adjustable spectra, altering the ratio of output channels requires prompt verification within the plant canopy, especially when adjusting far-red or blue ratios for specific growth phases. Proper energy distribution directly impacts dry matter accumulation and metabolic processes, as demonstrated in research on LED spectrum effects on tomatoes.

Limitations of Field Measurements

Chief engineers and agronomists must consider the operational boundaries of portable spectrometers. While a field device solves rapid monitoring tasks, it does not replace stationary testing in an accredited photometric laboratory equipped with an integrating sphere and a goniophotometer.

When conducting measurements directly inside a greenhouse, external factors influence readings: stray light from adjacent lighting zones, natural solar radiation, dust on protective covers, and sensor mounting height relative to the light-emitting surface. Furthermore, manufacturer materials do not state the sensor accuracy class, maximum permissible error limits, or recalibration interval requirements. Consequently, rapid field analysis serves as a reliable indicator of relative changes and module deviations, but requires a standardized measurement methodology to eliminate systematic errors.

Practical Steps for Engineering and Agronomic Teams

When implementing mobile spectrometers in commercial greenhouse workflows, it is advisable to establish a systematic light audit protocol:

  • Establish a baseline spectrum map. Immediately following installation of a new supplemental lighting system, record baseline spectrograms at reference points across each greenhouse compartment during nighttime hours to eliminate ambient light interference.
  • Configure a periodic monitoring database. Utilize the bundled software to archive measurement files linked to luminaire operating hours, tracking spectral ratio dynamics once per season.
  • Standardize measurement geometry. Conduct measurements at a fixed distance from the luminaire optical axis and at a standardized height above the plant canopy, logging air temperature in the mounting zone.
  • Verify dynamic control setpoints. Where multi-channel dimming is deployed, check actual spectral output against programmed lighting controller recipes before shifting to a new crop developmental stage.

Sources

Take a test and find out number of lamps for your greenhouse

About the Company

ECOLED-Trade Company implements projects based on unique LED phyto-lamps, which are designed to create new and modernize existing lighting systems in greenhouses under the ECOLED-BIO brand from the Russian manufacturer of the Light and Electric Technologies Group of Companies (LET GC LLC), Perm

Addresses and Contacts

Production
25 Tankistov Str., Perm
Sales Office
1 Kolskaya Str., build. 1, off. 210, Moscow

Contact us